Controlled By 3/6 axis integrated Accelerometer

the Sport & Tour Lights  will go thru 3 different phases during startup:

(1) Burnt Out Bulb Test

(2) Default Startup Mode Indicator i.e. lights will indicate starting in  Manual  Mode

(3) Default Strut Hardness @ Startup Indicator  (i.e. startup in Hard, Medium or Soft).

the Sport & Tour Lights  will go thru 3 different phases during startup:

(1) Burnt Out Bulb Test

(2) Default Startup Mode Indicator i.e. lights will indicate starting in  Auto Mode

(3) Default Strut Hardness @ Startup Indicator  (i.e. startup in Hard, Medium or Soft).

-How to get into Manual mode

-How to get into Auto Mode

-How to control the three different stiffness settings in Manual Mode

-How to control the settings in Auto Mode

-You can set the default start up mode to be either  Manual Mode or Auto Mode

-You can set the default start up mode struts stiffness settings to  be  Hard , Medium or Soft

-Learn about error codes that will display if a problem is detected with any of the four struts while the car has been running

-Learn how to execute the "Read Diagnostics" Mode so you can determine which specifc struts are causing the error codes that was detected while the car has been running

-Learn how to execute the "Run Diagnostics" Mode so that you can force an diagnostics test routine to test each of the four struts to test for correct operation.

You can use the Add-on LED Light's & Rotary Selector as part of a retrofiit to late model 3000gt cars that never had the ECS system  or as an Add-on to the OEM Factory setup to the early model cars.